USB Power

Powering your modular anywhere, with (almost) anything

LOW COST

Get Going on a Budget

With very few components, this power supply is one of the cheapest ways to get your modular running.

OPEN SOURCE

Following Music Thing Modular’s Example

Since this power supply was created directly from Tom Whitwell’s Stupid USB Power, all files are available on Github. PCBs are readily available for the DIY crowd.

SKIFF FRIENDLY

Slim Down Your Rack

USB Power leaves ample room for your modules to breathe.
Total size: 7.65″ x 1.1″ x 0.5″ excluding USB port overhang.

RESPECTABLE POWER

Enough to get you off the ground

  • 412mA +12V
  • 412mA -12V
  • (Dependent on power source) +5V

Like what you see?

Unsure if this PSU is for you? Check Github for a detailed look at its capabilities.
USB Power is available directly from me via Reverb
PCBs are available directly from me and Pusherman